These are thin vinyl square-shaped individual stickers with a printed image/photo of a tile. Each sticker will cover a wall tile of the same size. These stickers are NOT 3D embossed/patterned tiles or thick hard plastic or ceramic tiles.
These tile stickers will stick to any flat surface, but if you applied it to a problem area, you’ll be able to use a hairdryer to warm up the sticker and smooth it with a cloth to help to fix it to the wall or floor (you’ll be able to repeat this process many times).
Do not use tile stickers near direct heat such as an oven or an open flame. Use more than 25cm from the heat source.
FLOOR USE, stickers are slip-resistant in dry conditions, there is a Chance of Slipping if Wet so use the stickers on floors with caution!
Believe ordering extra stickers if you ought to use them in high traffic areas, simply remove and replace with new stickers. Once removed tile stickers aren’t re-useable.
Realistic looking effect that the general public will consider your stickers are real tiles. Your tile stickers will completely cover the existing tile, ensuring that the original tile does not show through.
You’ll receive fitting instructions and slightly priced tile stickers that have a great appearance and are easy to fit. Click on the Add to Basket button at the top right-hand corner of this page to start your tile transformation.
Click on the Add to Basket button on the top right-hand corner of this page to start your tile transformation.
These are thin vinyl square stickers with a printed image of a tile. Each sticker will cover a wall tile of the same size (not suitable to use on floor tiles). *These stickers are NOT Self-adhesive tiles with 3D gel pattern. **These vinyl stickers are NOT Self-adhesive thick hard plastic or ceramic tiles. *******Resistant to the temperature up to 120°C; the distance between sticker and heat source will have to be minimum 20cm, these stickers aren’t suitable for extreme temperatures above 120°C. DO NOT use in distance smaller than 20cm from the source of the heat.
INDIVIDUAL STICKER SIZE 15x15cm – These are thin vinyl square-shaped, 2D flat self-adhesive stickers with a printed image/photo of a tile. These are NOT 3D embossed/patterned tiles or hard tiles.
FOR LOW FOOT-TRAFFIC DRY AREAS – These wall/ floor decals are perfect for SMOOTH, FLAT, NON-POROUS surfaces, only, such as glass, plastics, metals, plasterboard, floor panels, painted walls, ceramic tiles, wallpaper, stone, marble, smooth wood, and varnished wood. Don’t apply these decals in textured walls, textured tiles, textured floors or any uneven surfaces.
WATER-RESISTANT – Can be mopped and cleaned with soap and water. FLOOR USE, stickers are slip-resistant in dry conditions, there is a Chance of Slipping if Wet so use the stickers on floors with caution! WALL USE, the stickers can be utilized in wet areas such as bathroom walls, shower walls, kitchen walls, and kitchen bathroom splashbacks.
REMOVABLE – tile decals can be removed without tearing into messy pieces (do note that if applied to painted surfaces, some paint may be lifted up – depending on the paint condition)
EASY TO TRIM – With scissors – around wall sockets, light switches and customised shapes. Tile transfers will cover existing tiles without showing the tile underneath.